Entries by admin

What are the types of gear transmission?

Gear transmission is widely used in industry. It is a mechanical transmission that uses the teeth of two gears to mesh with each other to transmit power and motion. So what are the types of gear transmission? 1. Cylindrical gear transmission For the transmission between parallel shafts, the general transmission ratio can reach 8 in […]

The swing gear/swing ring with OD2000mm is finished and delivered.

The swing gear/swing ring used for grinding machine is finished and delivered to customer. The swing gear details is as following. Product: swing gear M=6 z=358 Diameter=2161 Accuracy class: 6, with tooth grinding Material: 42CrMo4 Heat treatment: QT240-260 Tooth profile: spur gear The gear is ground with grinding machie Germany Niles gear grinder, it has CMM online […]

CZ customer bevel gear and bevel pinion finished and sent out.

This set of spiral bevel gears and a set of gears are used in a reducer. Although there is only one set and the parts are small, we still support the customers as usual. Due to the problem of bevel gear design, our engineers give modification suggestions. Although during the epidemic period, we are still […]

Gearbox of Vertical mill repair and maintain

This gearbox is a repair and  maintenance project of our company for a well-known iron and steel company. Through checking whether the gears, shafts, housing, expansion sleeves, couplings, bearings and  other parts  with damage, and give reasonable maintenance suggestions to customers. Recommended replacement or repair: 1. Input shaft coupling 2. High speed shaft 3. Low […]

Installation and alignment between girth gear and pinion of ball mill

There are two kinds of transmission forms of ball mill, i.e. center transmission and edge transmission. The two kinds of transmission have their own advantages and disadvantages. The central transmission adopts a high-speed planetary reducer, which is safe and reliable, with a service life of up to 10 years, low maintenance cost, but large one-time […]

What key points should be followed in the selection of gear production materials?

The most important thing in gear production process is to select good materials. Only with good materials can we produce high quality gears. For the selection of materials, the main points are as follows: 1. Meet the technological performance of gear material The technological properties of materials refer to the ability of materials themselves to […]